Efficient, Smart and Green
 |
 |
 |
| Efficient | Smart | Green |
PoolPak designs and builds its dehumidification equipment to be energy efficient. In the past ten years, PoolPak units have increased in efficiency nearly 12% and the PoolComPak an additional 16% with efficiency measured as the moisture removal capacity per compressor kW input. We carefully examine every aspect of our dehumidifiers determining the most effective design that delivers maximum comfort and at the lowest cost. From the finest components to a control system that squeezes out every available kW, PoolPak dehumidifiers are built like no others!
Heat Recovery and Pool Water Heating
- Heat pump cycle refrigeration system adds heat back into the air and pool water
- Thermal COP of up to 5
- Efficiently meets pool water set points
- Practically eliminates fuel usage for auxiliary heaters
Airside Heat Recovery
- Optional passive air-side heat recovery module
- Desirable for colder climates requiring higher operating temperatures
- Available on PoolPak SE- and SEP-Series systems
Heating, Cooling and Dehumidification Economizer
- Full economizer mode capable of using 100% outside air to maintain space conditions
- Delivers cooling, heating and dehumidification
- Modulates between economizer mode and mechanical refrigeration
- Takes greater advantage of outside conditions saving energy
- Available on Model SR
Smart Economizer Heating and Dehumidification
- Utilizes the outside air for heating and dehumidifying
- Operable over a wider range of outside air conditions
- Utilizes heat recovery and standard economizer modes in conjunction
- Adds an additional 15% to 20% energy savings over non-economizer systems
- Available on Model SR
Modulating Refrigeration Capacity
- Assures maximum system efficiency and life
- Delivers the best quality space and pool water conditions
- Available on all S-Series dehumidifiers
Backward Inclined Airfoil-Type Fans (BIAF)
- Moves air more efficiently
- Results in reduced energy requirements
- Available on all S-Series dehumidifiers
NEMA Premium Efficiency Motors
- NEMA/TEFC Premium Efficiency Motors used on blower systems
- Require less energy for equal loads
- Delivers longer service life
- Superior to EPAC high-efficiency rated motors
- Available on all S-Series dehumidifiers
Occupied/Unoccupied Mode
- Programmable for occupied and unoccupied modes
- Best management of ventilation requirements
- Occupied mode: Meets ASHRAE standards
- Unoccupied mode: Exhaust and outside air are shut off
- Eliminates costly conditioning of makeup air and exhaust blower operation
- Available on SE and SEP models
Smart Pool Water Pump Control
- Turns off the supplementary pool water pump
- Used during space heating or dehumidifying mode
- Works in conjunction with air heating priority system
- Saves over $3,000 per year (50% reduction in pump use)
R-410A Refrigerant
- Used in all PoolPak refrigeration systems
- Chlorine-free and environmentally-friendly
- Produces more cooling and dehumidifying capacity per kW
- Increasing system efficiency
CO2 Demand-Based Ventilation
- Continually monitors room CO2 levels
- Adjusts outside volume air to meet the space requirements
- Works in conjunction with ECC controller
- Significantly reduces heating and cooling loads
- Available on SE model
Flywheel Air Conditioning
- Used in mechanical cooling mode
- Utilizes pool water to remove excess heat
- Eliminates need for auxiliary outside condenser
- Minimizes compressor operation and eliminates condenser motor operation
- Available on SR and SEP models
Wall Condensate Prevention
- Prevents condensation on cold surfaces
- Monitors coldest indoor poolroom surface (typically north wall)
- Activates controller when wall temperature drops below dew point
- Automatically lowers RH and dew point set points
- Reduces excessive compressor operation
- Eliminates unnecessary dehumidifier over-sizing
Quality Construction
- Built to withstand the corrosive indoor pool environment
- High performance coatings
- Copper construction of critical parts
- Units operate long past industry standards
- Reduces impact on environment
Critical Component Location
- Compressors and critical components outside of the corrosive air stream
- Increases the life expectancy and reliability
- Reduces waste from frequent part replacements
Condensate Return
- Recycles condensate back into the pool
- Saves equivalent of entire pool per year
- Saves water and reduces load on utility infrastructures
MERV 7-14 Rated Filters
- High efficiency filter alternative
- Maintains a cleaner pool room space
- Promotes healthy environment for pool occupants
Internet Monitoring and Service Support
- Allows fast, easy access to set points and critical system information via internet
- Available to factory personnel or pool managers from any location
- Identifies problems quickly and maintains peak performance
- Promotes lowest cost of operation
Environmentaly-Friendly Corrosion Protection Finish
- Powder coating is the most environmentally friendly in use today
- Meets or exceed the highest US and European standards for minimum VOCs
- Scored highest in protection against the corrosive pool environment
